FIRE EXTINGUISHER SERVICING
England - Scotland -Wales
NEED AN INEXPENSIVE FIRE EXTINGUISHER REFILL SERVICE?
Budget your servicing bill with us.
LOW COST FIRE EXTINGUISHER MAINTENANCE
We offer ourselves as
FIRE
EXTINGUISHER SUB-CONTRACT ENGINEERS
and work anywhere in
UK
We are BAFE TRAINED TECHNICIANS
and can supply references
Phone us for a quotation

Save money with our low cost economical
fire extinguisher maintenance service.
Using our fire extinguisher maintenance
service means that you get the best possible job by
knowledgeable and friendly engineers - at rock bottom prices.
DID YOU KNOW?
Your insurance will become void
if your fire extinguishers are not maintained by a
qualified technician
FIRE EXTINGUISHER SERVICING
STANDARD SERVICING RATESRead this then see our special package below.
Servicing of fire extinguishers can be
pricey and labour intensive unless you use a company
that is fast, efficient and conscious of cost.
Our visiting fee to any commercial premises nationwide is just £30.00, or for Domestic premises £25.00 - (there is an additional fee for London congestion charge area £20.00).
The inspection fee per fire extinguisher is £5.00 and there is no charge for parts.
We do charge extra for any refilling an extinguisher which must be refilled every 5 years, otherwise the contents become ineffective. The extinguisher needs to be discharged to make sure it is working to British Standards. The exception is a CO2 extinguisher which only needs refilling every 10 years. It needs to be sent away for a stretch test and refilled. We offer a service exchange unit that has already been stretch tested and refilled. They have to be sent away for this specialised job and no engineer can do this on site.
All new fire extinguishers have to be commissioned according to the
British Standard requirement BS 5306-3.
All new fire extinguishers delivered attract a £5.00 commissioning fee and
there will a be £5.00 disposal fee per extinguisher for old
units where applicable. | During an inspection we
-
check year of manufacture -
check for rust
externally -
check for leaks by weighing each unit -
visually inspect the gauge -
if cartridge type open the head inspect for rust with a
torch -
inspect lining for signs of splitting -
check contents and measure
levels -
check siphon tube
-
replace 'O' ring on the head -
check
hose
-
test gauge -
sign and date labels (can only be done by qualified technicians,
who must pass an examination before being approved.) This is
only a general guide as each type of extinguisher needs different tests.
An average 23 jobs are completed at an
inspection. |
NO HIDDEN CHARGES
NO INFERIOR PRODUCTS
|

Fire Extinguisher Servicing
No-one does it better
SERVICING HOTLINE 24/7

FAST - EFFICIENT - LOW COST
Our engineers will be pleased to answer any of your
questions about prices or technical matters.
Please note. The following rule applies to any
fire extinguisher that we replace for the reason that it
is not able to be refilled or repaired. This charge is
unfortunately beyond our control.
As redundant fire extinguishers are
classed as hazardous waste they must be correctly
disposed of, which incurs a fee by the local authority.
Disposal of old
extinguishers £5.00 each.
Left - Malcolm Fleming weighing a CO²
extinguisher during a maintenance visit
The yellow portion, which is Kent, Sussex, Surrey, Hampshire, Dorset and South London, is the area that we cover from our head office.
The green portion is
the rest of England, Wales and Scotland, where we
have agents who carry out servicing and commissioning on
our behalf.
Contact us by telephone
0158 0755 538 for sales and service, or text
07971 932186, or by using our
contact form.
LONDON CONGESTION CHARGE - Any visit that we make to the London congestion charge area is
subject to an additional charge.
OUR FIRE EXTINGUISHER SERVICING POLICY
All servicing of fire extinguishers is carried out to
BS 5306-3
requirements.
Replacement extinguishers are approved to BS EN3 &
Kite marked.
All replacement extinguishers conform to European colour coding requirements.
Appropriate label colour coding is used to help identify correct type
of fire.
All replacement extinguishers conform to European pressure equipment
standards & display appropriate “CE” markings
All extinguisher replacements recognized & approved by insurance
companies.
Kite marked extinguishers are independently tested & approved
by BSI who are an accredited third party organisation.
CE approval & marking is a legal requirement in all
European
countries.
When a fire extinguisher has exceeded its warranty period is is often more economical to replace it rather than refill and service it.
This is recommended, not only for reliability and safety,
but because a new fire extinguisher will have a five year
warranty.
New and replacement fire extinguishers have to be
commissioned according to British Standard BS 5306-3 by an
authorised technician.
Our commissioning fee is £5.00 per fire extinguisher.
FIRE EXTINGUISHER SERVICING
For a more in-depth inquiry
for our product range please contact
us by clicking here.
All stated prices subject to VAT at current rate